Epson G5000 사용자 설명서

5

T

he software included with your projector lets you monitor and 

control your projectors from a remote computer.

First connect and configure each projector you want to monitor. You 
can connect the projector over a wired network as described in this 
chapter.

Once you’ve connected the projectors to the network, you can use any 
of these tools to manage your projectors:

■

Use EMP Monitor (available for Windows

®

 only) to see your 

projectors’ status, switch image sources, turn projectors on and 
off, control basic settings, and register projectors and projector 
groups. See the EMP Monitor Operation Guide for more 
information.

■

Use the mail notification function to receive e-mail alerts about 
possible problems. See page 67 for more information.

This chapter covers the following information:

■

Connecting your projector to a wired network

■

Using e-mail alerts to warn you of problems

Follow these steps to connect the projector to your network and 
configure it with an IP address: 

1. Connect the projector to your network using a commercially 

available 100BaseTX or 10BaseT network cable. Connect the 
cable to the 

LAN

2. Turn on the projector.