Epson G5000 사용자 설명서

When this feature is enabled, the projector sends you an e-mail alert if 
it has any problems. 

1. Press the 

Menu

 button on the remote control, select the 

Network

 menu, then press 

Enter

. You see the following screen: 

2. Choose 

Mail

, then press 

Enter

.

3. Highlight 

On 

to receive e-mail notifications, then press 

Enter

.

4. Enter the IP address for the 

SMTP server

 for the projector.

You can enter a number from 0 to 255 in each field of the address. 
However, the following IP addresses cannot be used: 127.x.x.x, 
224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 
255).

5. Enter the SMTP server’s port number. The default value is 25. 

You can enter a numeric value from 1 to 65535.

6. Choose one of the 

Email Address

 fields, then enter the e-mail 

address where you want to receive a message when a problem 
occurs. You can register up to three addresses. You can enter up to 
32 alphanumeric characters for the e-mail address.

You can also set e-mail alerts 
from EMP Monitor (see the 
EMP Monitor Operation 
Guide for more 
information).