Epson GT-15000 사용자 설명서

EPSON GT-15000

12/03

EPSON GT-15000 - 5

You can diagnose some problems by checking the scanner’s 
lights.

The EPSON Scan software offers three scanning modes:

❏ Home Mode includes a simple interface, automatic image 

adjustments, and preset configurations for various types of 
scans.

❏ Office Mode includes a basic interface with practical scan 

settings designed for documents. Choose this mode to scan 
multi-page documents on the optional automatic document 
feeder. 

❏ Professional Mode: Lets you manually configure advanced 

image settings, including the histogram setting, tone, color 
depth, balance, saturation, brightness, and contrast.

You can use EPSON Scan either in a “stand-alone” mode, or 
by starting from another program, such as PaperPort Deluxe 
or Photoshop Elements. (These programs are described in the 
User’s Guide.)

Follow the steps below to position the document on the 
scanner glass properly. (If you’re scanning a multi-page 
document using the optional automatic document feeder, see 
the User’s Guide.)

1.Raise the scanner cover and place the document face down 

in the upper left corner of the document table.

You can scan several pages or photos at the same time. Make 
sure you leave about an inch of space between them on the 
document table.

2.Close the document cover slowly.

 Be careful not to move the 

document.

Ready light is on 
or flashing.

The green Ready light is on when the scanner is 
ready to scan. It flashes when scanning is in 
progress.

Error light is 
flashing; Ready 
light is off.

There’s a problem with your cable connection. 
Reconnect the cable to both the scanner and your 
computer, and then restart your computer. If this 
doesn’t work, try using a different cable. If you have 
a USB connection, use the USB cable that came 
with your scanner. If you have a SCSI connection, 
always restart your computer after changing or 
reconnecting the cable.

Error

 

and

 

Ready 

lights are both 
on.

The scanner has received an incorrect command 
from your scanning software. Try scanning again.

Error and Ready 
lights are both 
off.

Make sure your scanner is connected to a working 
outlet, then press the 

P Power button. Restart your 

computer. 
If the green Ready light doesn’t come on, there may 
be a problem with the automatic document feeder, 
or the cover may be open. Make sure the cover or 
automatic document feeder is closed. If you are 
using the feeder, make sure a document is loaded, 
and pages are not jammed.

Error and Ready 
lights are both 
flashing.

Check that the transportation lock on the back of the 
scanner is set to Unlock. If not, unlock the scanner, 
then turn it off and back on again. Restart your 
computer. If this doesn’t solve the problem, contact 
EPSON.

Ready light

Start 
button

Power button

Error light