Epson GT-15000 사용자 설명서

EPSON GT-15000

12/03

EPSON GT-15000 - 7

3.Click 

OK

. 

If you want to change the program after you set up the 

a Start button, open the Scanners and Cameras utility in 
the Windows Control Panel.

Right-click your scanner and select 

Properties

. Select the 

Events

 tab, then select the program you want to use.

To keep your scanner operating at its best, clean it 
periodically. 

1.Press the 

PPower button to turn the scanner off, and 

unplug the power cord.

2.Use a soft, damp cloth and mild detergent to clean the outer 

case. (Apply the liquid to the cloth, not directly on the 
scanner.)

Caution: Don’t let water get into the scanner.

3.Clean dust and smudges from the document table glass with 

a soft, dry cloth (a microfiber glass cleaning cloth is 
recommended). You can also use compressed-air dust 
remover sprays. Dust on the glass can cause white spots to 
appear in your scanned image. 

To remove grease, use pretreated lens/scanner wipes, or a 
small amount of glass cleaner on a soft cloth. Dry the 
document table glass afterwards.

Cautions: Always unplug the scanner before cleaning.

Never use a harsh or abrasive brush or cleaning product to 
clean the document table. A damaged glass surface can 
decrease the scanning quality.

Never use alcohol, thinner, or corrosive solvent to clean the 
scanner. These chemicals can damage the scanner 
components as well as the case.

Be careful not to spill liquid into the scanner mechanism or 
electronic components. This could permanently damage 
them.

Don’t spray lubricants inside the scanner.

Never open the scanner case. If you think repairs or 
adjustments are necessary, consult your dealer or contact 
EPSON.

Unplug the scanner and refer servicing to qualified service 
personnel if the power cord or plug is damaged, if liquid has 
entered the scanner, if the scanner has been dropped or the 
case damaged, or if the scanner does not operate normally 
or exhibits a distinct change in performance.

Always secure the carriage when you transport the scanner a 
long distance or store it for an extended time.

1.If you’re using the automatic document feeder, remove it 

from the scanner and replace the scanner cover. 

Warning: Make sure you have someone help you lift the 
automatic document feeder. 

2.Turn on the scanner and wait until the carriage moves left 

to the home position. Then turn off the scanner.

3.Push down the transportation lock at the back of the 

scanner to the 

Lock

 position.

4.Use the scanner’s original box, or a similar box with enough 

packaging material to prevent it from moving around in the 
box.

5.Pack the automatic document feeder in its original box, or 

use a similar box with enough packaging material to prevent 
any movement inside the box.

CPD-17264

EPSON GT-15000 User’s Guide

EPSON GT-15000 Software Reference 
Guide (html)

Transportation lock