GoVideo vr1940 제품 매뉴얼

SYMPTOM

CAUSE

SOLUTION

Some channels are skipped over 

when using CH  

The skipped channels were deleted 

with the Add/Delete feature. 

See “Add/Delete Channels” on page 

29 or 30. 

Picture or sound of broadcasting 

channel is weak or missing. 

Antenna or cables are loose. 

Tighten connections or replace cable. 

Wrong TV Signal is selected in the 

DVD Recorder+VCR Setup menu. 

See “TV Signal” on page 29.

Camcorder image via AV input or 

DV IN to DVD Recorder+VCR is 

not shown on TV screen.

Camcorder is off. 

Turn camcorder on and operate 

properly. 

DVD Recorder+VCR’s input is not set 

to AV1-Front, AV2-Rear, S-Video, or DV. 

Press INPUT to select the correct 

input. 

Can’t play disc recorded on this 

DVD Recorder+VCR on another 

DVD player. 

The DVD+R disc was not finalized. 

Finalize the disc; see page 45. 

Some players will not play even a 

finalized disc. 

No solution. 

Cannot record or did not record 

successfully. 

The remaining blank space on the 

disc is insufficient. 

Use another disc. 

The source you are trying to record is 

copy- protected.

You cannot record the source. 

When setting the recording channel, 

the channel is tuned to the TV’s own 

tuner.

Select the channel on the DVD 

Recorder+VCR’s built-in TV tuner. 

Timer Recording does not work. 

DVD Recorder+VCR is not set to the 

correct time. 

Set date and time; see page 23.

Timer has been programmed 

incorrectly. TIMER indicator light does 

not appear after programming timer.

Reprogram Timer; see page 37. 

DVD Recorder+VCR is on.

Turn off the DVD Recorder+VCR.

Stereo Audio Recording and/or 

Playback not present. 

TV is not Stereo-compatible. 

No solution. 

Broadcast program is not in stereo 

format. 

No solution. 

DVD Recorder+VCR AV Out jacks are 

not connected to TV AV In jacks. 

Make AV connections. Stereo is 

available only via AV output from 

DVD Recorder+VCR. 

DVD Recorder+VCR Audio/Video Out 

is not selected for viewing at the TV. 

Select AUX or AV source as TV input. 

Remote control does not work 

properly. 

The remote control is not pointed 

at the remote sensor of the DVD 

Recorder+VCR. 

Point the remote control at 

the remote sensor of the DVD 

Recorder+VCR. 

The remote control is too far from the 

DVD Recorder+VCR. 

Operate the remote control within 

10 ft (3 m). 

There is an obstacle in the path of 

the remote control and the DVD 

Recorder+VCR. 

Remove the obstacle. 

The batteries in the remote control 

are exhausted.

Replace the batteries with new ones.