Инструкция Товара для GoVideo vr1940
47
Troubleshooting
(continued)
SYMPTOM
CAUSE
SOLUTION
Some channels are skipped over
when using CH
The skipped channels were deleted
with the Add/Delete feature.
See “Add/Delete Channels” on page
29 or 30.
Picture or sound of broadcasting
channel is weak or missing.
Antenna or cables are loose.
Tighten connections or replace cable.
Wrong TV Signal is selected in the
DVD Recorder+VCR Setup menu.
See “TV Signal” on page 29.
Camcorder image via AV input or
DV IN to DVD Recorder+VCR is
not shown on TV screen.
Camcorder is off.
Turn camcorder on and operate
properly.
DVD Recorder+VCR’s input is not set
to AV1-Front, AV2-Rear, S-Video, or DV.
Press INPUT to select the correct
input.
Can’t play disc recorded on this
DVD Recorder+VCR on another
DVD player.
The DVD+R disc was not finalized.
Finalize the disc; see page 45.
Some players will not play even a
finalized disc.
No solution.
Cannot record or did not record
successfully.
The remaining blank space on the
disc is insufficient.
Use another disc.
The source you are trying to record is
copy- protected.
You cannot record the source.
When setting the recording channel,
the channel is tuned to the TV’s own
tuner.
Select the channel on the DVD
Recorder+VCR’s built-in TV tuner.
Timer Recording does not work.
DVD Recorder+VCR is not set to the
correct time.
Set date and time; see page 23.
Timer has been programmed
incorrectly. TIMER indicator light does
not appear after programming timer.
Reprogram Timer; see page 37.
DVD Recorder+VCR is on.
Turn off the DVD Recorder+VCR.
Stereo Audio Recording and/or
Playback not present.
TV is not Stereo-compatible.
No solution.
Broadcast program is not in stereo
format.
No solution.
DVD Recorder+VCR AV Out jacks are
not connected to TV AV In jacks.
Make AV connections. Stereo is
available only via AV output from
DVD Recorder+VCR.
DVD Recorder+VCR Audio/Video Out
is not selected for viewing at the TV.
Select AUX or AV source as TV input.
Remote control does not work
properly.
The remote control is not pointed
at the remote sensor of the DVD
Recorder+VCR.
Point the remote control at
the remote sensor of the DVD
Recorder+VCR.
The remote control is too far from the
DVD Recorder+VCR.
Operate the remote control within
10 ft (3 m).
There is an obstacle in the path of
the remote control and the DVD
Recorder+VCR.
Remove the obstacle.
The batteries in the remote control
are exhausted.
Replace the batteries with new ones.
5 - Help