GoVideo d2730 제품 매뉴얼

The Network setup options should only be used if you are having difficulty establishing communication between your DVD player and home 

network. You may also wish to give your player a unique name on your network or change your wireless security settings. For context sensitive 

help in the Network setup menus, select Help and press ENTER.

The D2730 automatically obtains an IP (Internet Protocol) address when connected to a 

network by using DHCP (Dynamic Host Configuration Protocol). It is not recom-

mended that you change this setting unless you are an experienced network user. To 

change the method by which the IP address is obtained:
1 From Stop mode, press SETUP (located under the remote control flap door).
2 Select Network and press ENTER.
3 Select IP Address, and then use the  /  keys to choose one of the following:

• DHCP (Auto) - Automatically obtains an IP address and other configuration 

information from a DHCP server (recommended).

• Auto IP - Allows the DVD player to obtain an IP address for itself.
• Static (Manual) - Allows you to manually set the IP address and Subnet Mask. 

Only experienced network users should assign IP addresses. If you select Static 

(Manual), press the   key to select “Set...”, then manually enter the IP Address 

and Subnet Mask with the 0-9 keys. Click OK to save and exit.

4 Select OK and press ENTER.
5 Press SETUP or RETURN   to exit the Setup menu.

To change the name of the DVD player on the network:
1 From Stop mode, press SETUP.
2 Select Network and press ENTER.
3 Select Player Name, and then use the following keys to name the DVD player:

•

 Keys - Move the text insertion point ( _  ) left and right.

• 0-9 Keys - Press repeatedly to select the desired character as shown on the 

remote control keytops. For example, to spell “MY DVD”: Press 66 for M, 9999 

for Y, the   key for a blank space, 33 for D, 8888 for V, and 33 again for D.

4 Select OK and press ENTER.
5 Press SETUP or RETURN   to exit the Setup menu.