GoVideo d2730 제품 매뉴얼

To configure the DVD player for a wireless network:
1 From Stop mode, press SETUP.
2 Select Network and press ENTER to search for a network. “Searching for wireless 

networks”  is displayed followed by a list of available networks.

• Networks using access points are designated as “ACC PT.”
• Peer-to-Peer networks are designated as “P2P.”

3 Select one of the detected networks and press ENTER.
4 After a brief delay, “Successfully joined <Network>” is displayed. Press ENTER to 

continue. 

5 The IP address appears in the lower right corner of the screen. If the first two blocks 

of the IP address for the DVD player and PC match, you have successfully joined 

the network.

• To change the method by which the IP address is obtained, see “IP Address” on 

page 40.

• To rename the DVD player, see “Player Name” on page 40.
• To change the network security settings, see “Wireless Security” below.

6 Select OK and press ENTER.
7 Network setup is complete! Press SETUP or RETURN   to exit the Setup menu.

To change the security settings for a wireless network:
1 From Stop mode, press SETUP.
2 Select Network and press ENTER.
3 Select Security (or WEP (Wired Equivalent Privacy) Level in a Peer-to-Peer network), and then use the  /  keys to choose one of the avail-

able options:

• Disabled (default)
• 64 bit Key - Check the documentation that comes with your wireless network to confirm this setting.
• 128 bit Key - Check the documentation that comes with your wireless network to confirm this setting.

4 Select OK and press ENTER.
5 Press SETUP or RETURN   to exit the Setup menu.