Nikon D500 사용자 설명서
171
3
Select a preset.
Press the
Press the
U button and rotate the sub-command dial until
the desired white balance preset (d-1 to d-6) is displayed in
the control panel.
the control panel.
4
Select direct measurement mode.
Release the
Release the
U button briefly and
then press the button until the
L
icon in the control panel starts to
flash. A flashing
flash. A flashing
D will also
appear in the viewfinder.
5
Measure white balance.
In the few seconds before the indicators stop
flashing, frame the reference object so that it fills
the viewfinder and press the shutter-release
button all the way down. The camera will measure a value for
white balance and store it in the preset selected in Step 3. No
photograph will be recorded; white balance can be measured
accurately even when the camera is not in focus.
In the few seconds before the indicators stop
flashing, frame the reference object so that it fills
the viewfinder and press the shutter-release
button all the way down. The camera will measure a value for
white balance and store it in the preset selected in Step 3. No
photograph will be recorded; white balance can be measured
accurately even when the camera is not in focus.
U button
Sub-command
dial
Control panel
Control panel
Viewfinder