Canon VIXIA HF R50 지침 매뉴얼

Additional Information

Š

Trouble?

Troubleshooting

If you have a problem with your camcorder, refer to this section. Some-
times what you think is a malfunction of the camcorder may have the 
simplest of solutions - please read the “CHECK THIS FIRST” box 
before going on to the more detailed problems and solutions. Consult 
your dealer or a Canon Service Center if the problem persists.

The camcorder will not turn on or it turns off by itself.

- The battery pack is exhausted. Replace or charge the battery pack.
- Remove the battery pack and reattach it correctly.

Cannot charge the battery pack.

- Make sure the camcorder is off so charging can start.
- The temperature of the battery pack is outside its operating range (approximately 0 – 40 °C 

(32 – 104 °F)). Remove the battery pack, warm it or let it cool down, as necessary, and try 
charging it again.

- Charge the battery pack in temperatures between approximately 0 °C and 40 °C (32 °F and 

104 °F).

- The battery pack is faulty. Replace the battery pack.
- The camcorder cannot communicate with the battery pack attached. Battery packs not rec-

ommended by Canon for use with this camcorder cannot be charged using this camcorder. 

- If you are using a battery pack recommended by Canon for use with this camcorder, there 

may be a problem with the camcorder or battery pack. Consult a Canon Service Center.

Power supply
• Is the battery charged? Is the compact power adapter correctly con-

nected to the camcorder? (A 20)

Recording
• Did you turn the camcorder on and correctly set it to a recording 

mode? (A 37, 40) If you are recording on a memory card, is one cor-
rectly inserted into the camcoder? (A 24)

Playback
• Did you turn the camcorder on and correctly set it to playback mode? 

(A 46, 50) If you are playing back recordings from a memory card, is 
one correctly inserted into the camcorder? (A 24) Does it contain 
any recordings?

COP

Y