Canon VIXIA HF R50 지침 매뉴얼

Š

Additional Information

A noise can be heard from the compact power adapter.

- A faint sound can be heard while the compact power adapter is connected to a power outlet. 

This is not a malfunction.

The battery pack is exhausted extremely quickly even at normal temperatures.

- The battery may have reached the end of its battery life. Buy a new battery pack.

Pressing 

Y will not start recording.

- You cannot record while the camcorder is writing previous recordings onto the memory (while 

the ACCESS indicator is on or flashing). Wait until the camcorder has finished.

- The memory is full or it already contains the maximum number of AVCHD movies (3,999 

scenes). Delete some recordings (

A 53) or initialize the memory (A 29) to free some 

space.

- The file or folder number has reached its maximum value. Save your recordings (

A 105), 

set 1 

>

 

q 

>

 [File Numbering] to [Reset] and initialize the memory (

A 29).

The point where 

Y was pressed does not match the beginning/end of the 

recording.

- There is a slight interval between pressing 

Y and the actual start/end of record-

ing. This is not a malfunction.

The camcorder will not focus.

- Autofocus does not work on the subject. Focus manually (

A 76).

- The lens is dirty. Clean the lens (

A 179).

When a subject flits across in front of the lens, the image appears slightly bent.

- This is a phenomenon typical of CMOS image sensors. When a subject crosses very quickly in 

front of the camcorder, the image may seem slightly warped. This is not a malfunction.

Changing the operating mode between recording (

Ü)/recording standby (Ñ)/playback (Ð) 

takes longer than usual.

- When the memory contains a large number of scenes, some operations may take longer than 

usual. Save your recordings (

A 105) and initialize the memory (A 29).

Movies or photos cannot be recorded properly.

- This may occur as movies and photos are recorded/deleted over time. Save your recordings 

(

A 105) and initialize the memory using the [Complete Initialization] option (A 29).

Cannot record a photo while recording movies.

- You cannot take photos in 

 mode or while fading in or fading out a scene (

A 74).

After using the camcorder for a long time, it becomes hot.

- The camcorder may become hot after using it continuously for long periods of time; this is not 

a malfunction. If the camcorder becomes unusually hot or it becomes hot after using it only for 
a short while, it may indicate a problem with the camcorder. Consult a Canon Service Center.

COP

Y