Canon VB-R13 매뉴얼

110

Note

If you set Auto Flip to [Enable], some of the settings in [Restrict View] are disabled (P. 128).

If tracking a subject that passes directly under a ceiling mounted camera (tilt angle 90°), the video will flip as the tilt angle 

nears 100° without the subject appearing inverted.

Day/Night (When Auto Is Set)

Set conditions for switching Day Mode and Night Mode when [Day/Night] is set to [Auto].

[Switching Brightness]

Select the brightness for switching Day/Night Mode when [Day/Night] is set to [Auto].

Select [Darker] if you want to capture video in color as much as possible.

Select [Brighter] to reduce noise. Note that this mode switches to monochrome sooner.

[Response (sec.)]

Select the number of seconds for determining when to switch Day/Night Mode, when [Day/Night] is set to [Auto]. Day/Night 

Mode switches when the brightness continues to exceed or fall below the brightness set in [Switching Brightness] within 

any of the settings for the number of seconds selected.

Select [30] or [60] if brightness changes frequently, such as when a light source passes in front of the camera. Select [5] or 

[10] if change in brightness is minimal.

R12

R13

Pan: 180°

Tilt: -50°

Pan: 180°

Tilt: -90°

Pan: 180°

Tilt: -100°



Pan: 0°

Tilt: -80°

Pan: 0°

Tilt: -50°

If the tilt angle exceeds 100°, Auto Flip will occur, and 

the video and coordinates will be flipped.