Canon VB-R13 매뉴얼

S

e

tting th

e Camera

 Angle

3

49

To operate the camera angle using the [Rotation] slider, click the slider or drag the tab to adjust the camera to an 

angle where the subject in the video is horizontal.



Setting Camera Angle by Clicking Video

If you click anywhere in the video display area, the camera angle will change to center on that location.

If you click outside the pan or tilt range, however, the camera angle will only change for the one which is within its 

range.

Note

If the camera moves differently than the intended operation, or if settings in the full range displayed by control assist cannot be 
made, control assist may be out of alignment with the actual camera angle. In this case, click [Exec] for [Control Assist Correction], 
and set the camera angle again.

Setting the Focus

You can automatically or manually focus on the subject, or fix the focus at infinity. When manually operating the focus, you 

can use the One-shot AF feature to focus on the subject.

For precautions, etc. regarding the focus, please refer to the “Important” and “Note” sections of [Camera] > [Initial Setting] 

> [Camera Settings] > [Focus] on the Setting Page (P. 114).

 

Controls the rotation.

Digital Zoom Range