Canon VB-R13 매뉴얼

30



Date and Time

(1)

[Setting Method]
Select the setting method for the date and time.

(2)

[Date], [Time]
Configure the settings as follows in accordance with the [Setting Method] setting.

When [Set manually] is selected
Set the desired date and time.

Set the time in 24-hour format in <hour:minute:second> order.

When [Set manually] is selected and [Synchronize with computer time] is selected

Synchronizes the date and time with the computer that is currently accessing the camera.

[Time Zone] is not selected automatically so set it separately if necessary.

When [Synchronize with NTP server] is selected
Select the setting method in [Auto-Setting of NTP Server].

When [Synchronize with NTP broadcast] is selected
Receives NTP broadcasts sent from the NTP server and synchronizes the time with them.

The camera’s NTP broadcast mode does not support IPv6.

(3)

[Auto-Setting of NTP Server]

[Disable]
Enter the IP address or host name of the NTP server in [NTP SERVER].

[Use DHCP]
The address of NTP server is automatically acquired from the DHCP server (IPv4).

To configure the settings, you need to set [Network] > [IPv4 Address Setting Method] to [Auto (DHCP)] (P. 27).

[Use DHCPv6]

The address of NTP server is automatically acquired from the DHCPv6 server. To enable this setting, settings for 

[IPv6] need to be configured on the camera setting page. For details about the setting page, refer to the 

camera’s “Operation Guide”.

[Use DHCP/DHCPv6]
The address of DHCP server (IPv4) or DHCPv6 server is automatically acquired.

(1)

(2)

(3)

(4)

(5)

(6)