Canon VB-R13 매뉴얼

62

[Admin Account] cannot be set for some camera models.

[Restore all information.] cannot be set for some camera models.

Note

[Encryption Password] can be entered when backing up/restoring for some camera models. Only alphanumeric characters, 
symbols, and spaces can be used for a password.
The password set here will be required to restore data using the encrypted backup data.

A confirmation message for restoring the setting values appears.

Restoring of the camera setting values begins.

A progress bar is displayed in the [Message] field while restoring. If you are performing restoration, and the 

restoration fails for some cameras, the message is displayed. Confirm the message displayed in the [Message] 

field.

Note

You can stop the restore process part way through by clicking [Stop]. In that case, the restore will only be stopped for those 
cameras waiting for the process to be performed.

To restore the administrator account, select [Restore] from the [Admin Account] pull-down list.

Important

If an Admin Account restore is performed, the password setting when the backup file was created will be restored. Be sure to 
verify the administrator password for when the backup file was created.

To restore all the camera settings, select [Restore] from the [Restore all information.] pull-down list.

Important

If you have selected [Restore all information.], IP addresses, network settings, and SSL/IPsec secure communication information 
will also be restored. This may result in duplicated camera IP addresses after the restore is complete. Please beware when 
executing this operation.

Click [Start].

Click [Yes].