Canon VB-R13 매뉴얼
T
roubleshooting
9
155
Error Codes
Winsock Error Codes
SMTP Error Codes
Code
Error Messages
Possible Cause
10038
An operation was attempted on something that is
not a socket.
not a socket.
This may occasionally occur. No action is required.
10048
Only one usage of each socket address (protocol/
network address/port) is normally permitted.
network address/port) is normally permitted.
All communication resources are in use. This error
is frequently reported when a video can no longer
be displayed in a Viewer layout sequence.
is frequently reported when a video can no longer
be displayed in a Viewer layout sequence.
10050
A socket operation encountered a dead network.
Occurs when the computer recognizes that the
network is down because the router or hub closest
to the computer is powered off. Normally, this
cannot be recognized, therefore this error is rarely
reported.
network is down because the router or hub closest
to the computer is powered off. Normally, this
cannot be recognized, therefore this error is rarely
reported.
10051
A socket operation was attempted to an
unreachable network.
unreachable network.
Occurs when other network devices recognize that
the network is down because the router or hub is
powered off. Normally, this cannot be recognized,
therefore this error is rarely reported.
the network is down because the router or hub is
powered off. Normally, this cannot be recognized,
therefore this error is rarely reported.
10054
An existing connection was forcibly closed by the
remote host.
remote host.
The connection was aborted by the camera due to
a camera restart or other causes. This may occur
when the camera is restarted using the restart
button on the Setting Page provided by the camera
software. However, this rarely occurs.
a camera restart or other causes. This may occur
when the camera is restarted using the restart
button on the Setting Page provided by the camera
software. However, this rarely occurs.
10060
A connection attempt failed because the
connected party did not properly respond after a
period of time, or established connection failed
because connected host has failed to respond.
connected party did not properly respond after a
period of time, or established connection failed
because connected host has failed to respond.
A timeout occurred in the TCP connection with the
camera. This occurs when the camera is powered
off.
camera. This occurs when the camera is powered
off.
10061
No connection could be made because the target
machine actively refused it.
machine actively refused it.
The camera rejected the TCP connection. This
occurs when the port number is incorrect or from
another cause.
occurs when the port number is incorrect or from
another cause.
10064
A socket operation failed because the destination
host was down.
host was down.
Occurs when the camera is powered off. Normally,
10060 occurs.
10060 occurs.
10065
A socket operation was attempted to an
unreachable host.
unreachable host.
There is no route for connecting to the camera. This
may also occur when there is a failure in the
network cable connected to the computer or hub.
may also occur when there is a failure in the
network cable connected to the computer or hub.
10091
WSAStartup cannot function at this time because
the underlying system it uses to provide network
services is currently unavailable.
the underlying system it uses to provide network
services is currently unavailable.
There is a failure on the computer’s network
adapter.
adapter.
11001
No such host is known.
The host name could not be resolved in the DNS.
11004
The requested name is valid, but no data of the
requested type was found.
requested type was found.
The host name could not be resolved in the DNS.
Code
Error Messages
Possible Cause
421
‘domain’ Service not available, closing transmission
channel
channel
The communication was terminated because the
mail server was stopped.
mail server was stopped.
450
Requested mail action not taken: mailbox
unavailable
unavailable
The requested mail processing was not performed
because the mailbox is not available.
because the mailbox is not available.
451
Requested action aborted: local error in processing
The requested operation was canceled because an
error occurred in the mail server.
error occurred in the mail server.
502
Command not implemented
The mail server does not support the command that
was sent.
was sent.
550
Requested action not taken: mailbox unavailable
The request was not executed because the mailbox
is not available.
is not available.