Canon VB-R13 매뉴얼
S
etting a R
ecording
S
che
dule
5
79
Using the Storage Server for Motion Detection
Note
If you select [MPEG-4] or [H.264] in [Video Format], the [Storage Server] option in [Detect Motion Using] cannot be selected. Note
also that if you select [MPEG-4] or [H.264] in other recording modes besides motion detection recording, the [Storage Server]
option still cannot be selected.
also that if you select [MPEG-4] or [H.264] in other recording modes besides motion detection recording, the [Storage Server]
option still cannot be selected.
(1)
[Detect Motion Using]
Select [Storage Server] to detect motion using a Storage Server.
Select [Storage Server] to detect motion using a Storage Server.
(2)
[Priority]
Select the priority of the motion detection events. For details, please refer to “Check Events” (P. 115).
Select the priority of the motion detection events. For details, please refer to “Check Events” (P. 115).
(3)
[Frame Rate]
Specify the motion detection frame rate (frames per second).
Specify the motion detection frame rate (frames per second).
(4)
[Settings Mode]
If you select [Simple], [Sensitivity] and [Area Ratio] can only be set using the sliders. [Duration] is fixed at 0.2
If you select [Simple], [Sensitivity] and [Area Ratio] can only be set using the sliders. [Duration] is fixed at 0.2
seconds.
If you select [Advanced], the [Sensitivity], [Area Ratio] and [Duration] settings become available so that values
can be set.
(5)
[Sensitivity]
Specify the motion detection sensitivity within the range of 1 to 256. Increase the number to increase the
Specify the motion detection sensitivity within the range of 1 to 256. Increase the number to increase the
sensitivity.
(6)
[Area Ratio]
Specify the area of the preview video that the Storage Server uses for motion detection. The range is 0 to 100%.
The size marker inside the Detection Indicator changes position depending on the value of this setting.
(7)
[Duration]
Specify the length of time the motion signal must be present to decide that there is motion. The range is 0.0 to
Specify the length of time the motion signal must be present to decide that there is motion. The range is 0.0 to
5.0 seconds.
(8)
[Active Region]
Displays a preview video from the camera used for motion detection.
Displays a preview video from the camera used for motion detection.
Displays a dotted-line frame representing the active region on top of the preview video. Drag the frame handles
to make it larger or smaller.
Important
The load on the Storage Server CPU increases when motion detection is performed on the Storage Server. We strongly
recommend that you use the motion detection on the camera, if it is available.
recommend that you use the motion detection on the camera, if it is available.
[Recording Settings] tab
[Settings] tab
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(4)
(5)
(6)
(7)
(8)
(9)