Canon XF100 매뉴얼

129

Connecting to an External Monitor

Using the AV Terminal

When you output video from the AV terminal, the video signal is converted to an analog SD composite video
signal. In addition, the AV terminal also outputs audio. You can select the SD output method (0 126).

NOTES

• If necessary, you can superimpose the onscreen displays on the video displayed on the external monitor

(0 129).

• When you play back a clip on a monitor with a 4:3 aspect ratio, the monitor will switch automatically to

widescreen mode if it is compatible with the Video ID-1 system.

Superimposing Onscreen Displays to Appear on an
External Monitor

You can choose to superimpose onscreen displays on the video output
from the HD/SD SDI terminal (b only), HDMI OUT terminal, HD/SD
COMPONENT OUT terminal or AV terminal. Doing so will display the
onscreen displays on an external monitor. You must set this function
separately for HD and SD output. This setting will not affect your
recordings.

1 Open the [HD Onscreen Disp.] or [SD Onscreen Disp.] submenu.

[N Video Setup]

[HD Onscreen Disp.] or [SD Onscreen Disp.]

2 Select [On] and then press SET.

• G appears on the right side of the screen (when [M LCD/VF Setup]

[Custom Display 2]

[Output

Display] is set to [On]).

NOTES

• Onscreen displays will not appear on an external monitor for SD output if [N Video Setup]

[SD Output] is

set to [Side Crop].

[N Video Setup]

[HD Onscreen Disp.]

[SD Onscreen Disp.]

[Off]

COP