Epson Сетевое руководство 네트워크 가이드
5. For LPR or Internet printing:
Double-click Internet Protocol Version 4 (TCP/IPv4) on the Local Area Connection
Properties dialog box to open the Internet Protocols Version 4 (TCP/IPv4) Properties dialog
box. Set the IP address, the subnet mask, etc. and then click OK.
Properties dialog box to open the Internet Protocols Version 4 (TCP/IPv4) Properties dialog
box. Set the IP address, the subnet mask, etc. and then click OK.
6. Restart the computer.
The necessary components are now installed. Go to the section “Connecting the Network Interface
to the Network” on page 36.
to the Network” on page 36.
Windows XP
For Windows XP, use the following procedure to install the necessary components.
1. Click Start, highlight Control Panel, and then click Network and Internet Connections.
Select Network Connections.
2. Under LAN or High-Speed Internet, click the Local Area Connection icon.
3. Under Network Tasks, click Change settings of this connection.
4. Check if the following necessary components are in the list. If they are already installed, go to
the next chapter.
EPSON Network Guide
How To 25