Epson Руководство по установке устройства настенного крепления модели ELPMB25 설치 가이드
21
Removing the Ceiling Plate from the Projector Plate
The ceiling plate is fitted to the projector plate at the factory. Use the following procedure to
separate them.
separate them.
A
Remove the screws for the vertical tilt
adjustment points on both sides using
the supplied hexagon wrench (M8).
adjustment points on both sides using
the supplied hexagon wrench (M8).
B
Remove the ceiling plate from the
projector plate.
projector plate.
Installing the Ceiling Plate to the Ceiling
Determine the distance to the screen and locate the mounting position before mounting the
ceiling plate.
The distance varies according to the type of the lens unit installed on the projector. Refer to
the "User's Guide" supplied with the projector or lens unit.
ceiling plate.
The distance varies according to the type of the lens unit installed on the projector. Refer to
the "User's Guide" supplied with the projector or lens unit.
Installation
Procedure