Epson Руководство по установке устройства настенного крепления модели ELPMB25 설치 가이드
23
The ceiling plate can be horizontally rotated at ±5 degrees. Adjust the direction of the
projector using four bolts secured loosely. After adjusting the direction, tighten the hexagon
nuts securely.
projector using four bolts secured loosely. After adjusting the direction, tighten the hexagon
nuts securely.
Fitting the Projector Plate to the Projector
Female type anchors
Concrete
Hanger bolts
Spring washers
Hexagon nut
At least 3 threads
Ceiling surface
Flat washers
Hexagon nut
The center of rotation
when adjusting the direction
when adjusting the direction
vTighten all screws securely.
After securing the screws, retighten them and make sure that they are not loose.
vUse the supplied safety wires to prevent the projector from falling. sp.28
vApplying a screw-locking adhesive, lubricant, oil or other substance to the
vApplying a screw-locking adhesive, lubricant, oil or other substance to the
points at which the projector is fixed to the ceiling mount can make the case
crack and the projector fall, leading to damage or injury. Do not use any sort
of adhesive, lubricant, or oil when installing or adjusting the ceiling mount.
crack and the projector fall, leading to damage or injury. Do not use any sort
of adhesive, lubricant, or oil when installing or adjusting the ceiling mount.
Warning