Canon imageCLASS MF244dw 매뉴얼

The following items are also set to <On> automatically.

●

●

<Use HTTP>  Disabling HTTP Communication(P. 245)

●

[Use  IPP  Printing]  under  [IPP  Print  Settings]  Changing  the  Setting  of  Functions  Available  with
AirPrint(P. 149)

●

●

If you change [Printer Name] that you have once specified, you may be unable to print any more from the
Mac that has been able to be used for printing so far. This phenomenon occurs because <mDNS Name>
(  Configuring DNS(P. 211) ) of IPv4 is also changed automatically. In this case, add the machine to the
Mac again.

◼

Changing the Setting of Functions Available with AirPrint

If you want to disable functions that you are not going to use with AirPrint or encrypt communications, configure the

necessary setting using the operation panel or Remote UI.

To perform printing with AirPrint, IPP protocol is used.

You can specify whether to perform printing with AirPrint. The factory default setting is [On].

Log on to the Remote UI in System Manager Mode (  Starting Remote
UI(P. 272) )   [Settings/Registration]   [Network Settings]   [TCP/IP Settings]   [IPP Print
Settings]   [Edit]   Clear or select the [Use IPP Printing] check box   [OK]

You can specify whether to encrypt communications using TLS when performing printing with AirPrint. The factory
default setting is [On].

●

When the machine is connected to a Mac via USB, set [Use TLS] to [Off].

Log on to the Remote UI in System Manager Mode (  Starting Remote
UI(P. 272) )   [Settings/Registration]   [Network Settings]   [TCP/IP Settings]   [IPP Print
Settings]   [Edit]   Clear or select the [Use TLS] check box   [OK]

To perform scanning with AirPrint, Network Link Scan is used.

Can Be Used Conveniently with a Mobile Device

149