Canon imagePROGRAF iPF830 MFP M40 매뉴얼
5
Push down the release lever (a) as shown as you gently re-
turn all ink tank lock levers to the original position.
turn all ink tank lock levers to the original position.
6
Close the Ink Tank Cover.
At this point, ink is drawn out from inside the tubes.
At this point, ink is drawn out from inside the tubes.
Important
•
Do not remove the Maintenance Cartridge except when the message for replacing it is displayed.
If you remove the Maintenance Cartridge while ink is being drawn out, the ink may leak out.
If you remove the Maintenance Cartridge while ink is being drawn out, the ink may leak out.
7
When the process is finished, "Preparations for moving the printer finished. Turn the power off" is dis-
played.
When this happens, replace the Maintenance Cartridge currently being used with a new Maintenance Car-
tridge.
played.
When this happens, replace the Maintenance Cartridge currently being used with a new Maintenance Car-
tridge.
8
Press the Power button and turn off the printer.
Pack the printer
1
Disconnect the power cord and interface cable, as well as the Media Take-up Unit cable.
Important
•
Turn off the printer before you unplug it. It may damage the printer if you unplug it before it is off and
transfer it in that state. If you accidentally unplug the printer, plug it in again, reinstall the ink tanks, and
follow this procedure again.
transfer it in that state. If you accidentally unplug the printer, plug it in again, reinstall the ink tanks, and
follow this procedure again.
a
iPF830
Preparing to Transfer the Printer
Maintenance and Consumables
Other Maintenance
597