Canon imagePROGRAF iPF830 MFP M40 매뉴얼

Important

Here, the Belt Stopper is the one that was removed and stored after initial installation. Neglecting to
attach the Belt Stopper may damage the printer.

Do not touch the Linear Scale (a), Carriage Shaft (b),
or Ink Tube Stabilizer (c). Touching these parts may
damage them.

c

a

b

 

 

Close the Top Cover.

 

Tape down printer covers to secure them, in the reverse or-
der of tape removal during installation.

Remove and package the Output Stacker by reversing the installation procedure.

Remove and package the Stand by reversing the installation procedure, when it was attached to the printer.

Disassemble and repackage the Stand by following the installation procedure in reverse.

Repack the Roll Holder, Holder Stopper, and printer in shipping materials, and then package them in a
shipping box.

The basic workflow for reinstalling the printer is as follows.
For detailed instructions, see the Setup Guide.

 

 

iPF830

                                                                                                                                                                                             

Reinstalling the Printer

                                                                                                                                                                                                                      

Maintenance and Consumables

Other Maintenance

599