Canon imagePROGRAF iPF9400 매뉴얼

Handling sheets

Handling sheets

Follow these steps to load sheets in the printer.

Important

Paper that is wrinkled or warped may jam. If necessary, straighten the paper and reload it.

Load the paper straight. Loading paper askew will cause an error.

Note

Loading sheets when a roll is already loaded in the printer may cause jams. We recommend removing rolls before load-
ing sheets. 

To prevent the roll from unwinding if you leave it loaded, wrap a sheet of paper around the roll and tape it.

Before loading sheets, make sure the printer is clean inside the Top Cover and around the Ejection Guide. If these areas
are dirty, we recommend cleaning them in advance. 

Store unused paper in the original package, away from high temperature, humidity, and direct sunlight.

Select sheets as the paper source.

If a print job was received
Sheets are automatically selected, and the media type and size specified by the print job are shown on
the Display Screen.
Press ▲ or ▼ to select Load Paper, and then press the OK button.

If no print job was received

 

Press the Load button.

Press ▲ or ▼ to select Load Cut Sheet, and then press the OK button.

Note

If any paper has been advanced that will not be used, a message is shown requesting you to remove it.
Press ▲ or ▼ to select "Yes", and then press the OK button. Remove the paper and go to the next step.

 

Loading Sheets in the Printer

                                                                                                                                                                                       

iPF9400

                                                                                                                                                                                                                                 

Handling Paper

Handling sheets

 

18