Canon imagePROGRAF iPF670 매뉴얼

HP-GL/2 problems

With HP-GL/2, printing is misaligned .................................................................................................................... 600

Lines or images are missing in printed HP-GL/2 jobs. ........................................................................................... 600

Lines are printed too thick or thin in HP-GL/2 print jobs ........................................................................................ 600

HP-GL/2 jobs are printed in monochrome (or color) .............................................................................................. 600

Printed colors of lines are inaccurate during HP-GL/2 printing .............................................................................. 601

HP-GL/2 jobs are printed 6 mm larger than specified ........................................................................................... 601

HP-GL/2 jobs are printed at maximum size, even if a standard size is specified .................................................... 601

HP-GL/2 printing takes a long time ....................................................................................................................... 601

Replotting with HP-GL/2 jobs is not possible. ....................................................................................................... 601

The printer stops when printing a HP-GL/2 job (the carriage stops moving) .......................................................... 601

With HP-GL/2, printing is misaligned

Cause

Corrective Action

The plotter origin is incorrect.

Check the printing commands.

The Margin setting in the Control Panel menu is incorrect. Adjust the Margin setting values in the Control Panel menu.

Lines or images are missing in printed HP-GL/2 jobs.

Cause

Corrective Action

The memory is full.

Check the size of the data in the print job.

An HP-GL/2 command not supported by this printer was received.

Check the print job and settings.

The printer has received print data that includes HP RTL commands when
Auto Rotate is On in the Control Panel menu.

In the Control Panel, set Auto Rotate to Off and print again.

PageSizeProcess1 in the Control Panel menu is set to On.

Set PageSizeProcess1 to Off in the Control Panel menu.

Lines are printed too thick or thin in HP-GL/2 print jobs

Cause

Corrective Action

The Width setting in the Control Panel
menu is incorrect.

Change the Width setting configured in Pen no. of the Palette A or Palette B selected in
the Control Panel menu.

ThickenFineLines in the Control Panel
menu is set to Off.

If fine lines are printed faintly, setting ThickenFineLines to On will print the lines more dis-
tinctly.

HP-GL/2 jobs are printed in monochrome (or color)

Cause

Corrective Action

The Color Mode setting in the
Control Panel menu is incorrect.

Check the Color Mode setting in the Control Panel menu.

However, for optimal Printhead performance, the printer consumes trace amounts of color ink even
when Monochrome is selected as Color Mode.

With HP-GL/2, printing is misaligned

iPF670

User's Guide

Troubleshooting

HP-GL/2 problems

600