Netgear R7900 - Nighthawk X6—AC3000 Tri-Band WiFi Gigabit Router 사용자 설명서
Specify Internet Port Settings
169
Nighthawk
X6
AC3000
Tri-Band
WiFi Router
10.
In the Triggering Port field, enter the number of the outbound traffic port that will open the
inbound ports.
11.
In the Connection Type, Starting Port, and Ending Port fields, enter the inbound
connection information.
12.
Click the Apply button.
The service is now in the Portmap table. You must enable port triggering before the
router uses port triggering. See
router uses port triggering. See
Enable Port Triggering
To enable port triggering:
1.
Launch a web browser from a computer or wireless device that is connected to the
network.
2.
Enter http://www.routerlogin.net or http://www.routerlogin.com in the address field of the
web browser.
A login screen displays.
3.
Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
password are case-sensitive.
The BASIC Home screen displays.
4.
Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering.
The Port Forwarding/Port Triggering screen displays.
5.
Select the Port Triggering radio button.
6.
Clear the Disable Port Triggering check box.
If this check box is selected, the router does not use port triggering even if you have
specified port triggering settings.
specified port triggering settings.
7.
In the Port Triggering Timeout field, enter a value up to 9999 minutes.