Netgear R7900 - Nighthawk X6—AC3000 Tri-Band WiFi Gigabit Router 사용자 설명서
Specify Your Internet Settings
28
Nighthawk
X6
AC3000
Tri-Band
WiFi Router
Use Auto Config for an IPv6 Internet Connection
To set up an IPv6 Internet connection through auto configuration:
1.
Launch a web browser from a computer or wireless device that is connected to the
network.
2.
Enter http://www.routerlogin.net or http://www.routerlogin.com in the address field of the
web browser.
A login screen displays.
3.
Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
password are case-sensitive.
The BASIC Home screen displays.
4.
Select ADVANCED > Advanced Setup > IPv6.
The Basic Settings screen displays.
5.
In the Internet Connection Type list, select Auto Config.
The router automatically detects the information in the following fields:
•
Router’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired
for the router’s WAN (or Internet) interface. The number after the slash (/) is the length
of the prefix, which is also indicated by the underline (_) under the IPv6 address. If no
address is acquired, the field displays Not Available.
for the router’s WAN (or Internet) interface. The number after the slash (/) is the length
of the prefix, which is also indicated by the underline (_) under the IPv6 address. If no
address is acquired, the field displays Not Available.
•
Router’s IPv6 Address on LAN. This field shows the IPv6 address that is acquired
for the router’s LAN interface. The number after the slash (/) is the length of the prefix,
which is also indicated by the underline (_) under the IPv6 address. If no address is
acquired, the field displays Not Available.
for the router’s LAN interface. The number after the slash (/) is the length of the prefix,
which is also indicated by the underline (_) under the IPv6 address. If no address is
acquired, the field displays Not Available.
6.
(Optional) In the DHCP User Class (If Required) field, enter a host name.