Netgear R7900 - Nighthawk X6—AC3000 Tri-Band WiFi Gigabit Router 사용자 설명서
Specify Your Internet Settings
26
Nighthawk
X6
AC3000
Tri-Band
WiFi Router
The Basic Settings screen displays.
5.
In the Internet Connection Type list, select the IPv6 connection type:
•
If you are not sure, select Auto Detect so that the router detects the IPv6 type that is
in use.
in use.
•
If your Internet connection does not use PPPoE or DHCP or is not fixed, but is IPv6,
select Auto Config.
select Auto Config.
Your Internet service provider (ISP) can provide this information. For more information
about IPv6 Internet connection, see the following sections.
about IPv6 Internet connection, see the following sections.
-
-
-
-
-
-
-
6.
Click the Apply button.
Your changes take effect.
Requirements for Entering IPv6 Addresses
IPv6 addresses are denoted by eight groups of hexadecimal quartets that are separated by
colons. You can reduce any four-digit group of zeros within an IPv6 address to a single zero
or omit it. The following errors invalidate an IPv6 address:
colons. You can reduce any four-digit group of zeros within an IPv6 address to a single zero
or omit it. The following errors invalidate an IPv6 address:
•
More than eight groups of hexadecimal quartets
•
More than four hexadecimal characters in a quartet
•
More than two colons in a row
Use Auto Detect for an IPv6 Internet Connection
To set up an IPv6 Internet connection through auto detection:
1.
Launch a web browser from a computer or wireless device that is connected to the
network.
2.
Enter http://www.routerlogin.net or http://www.routerlogin.com in the address field of the
web browser.
A login screen displays.
3.
Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
password are case-sensitive.