Netgear JWNR2000v2 - Wireless-N 300 Router 사용자 설명서

Be sure you are using Ethernet cables like the cable that was supplied with the router. See 

the NETGEAR Wireless Router Setup Manual for instructions.

Login Problems

If you are unable to log in to the router, check the following:

If you are using an Ethernet-connected computer, check the Ethernet connection 

between the computer and the router as described in the NETGEAR Wireless Router 
Setup Manual

.

Make sure you are using the correct login information. The factory default login name is 

admin and the password is password. Make sure that the Caps Lock is off when 

entering this information.

Make sure your computer’s IP address is on the same subnet as the router. If your are 

using the recommended addressing scheme, your computer’s address should be in the 
range of 192.168.1.2 to 192.168.1.254. Refer to your computer’s documentation.

If your computer cannot reach a DHCP server, some operating 

systems will assign an IP address in the range 169.254.x.x. If your 
IP address is in this range, verify that you have a good connection 
from the computer to the router, then restart (reboot) your computer.

If your router’s IP address has been changed and you don’t know the current IP address, 
reset the router’s configuration to the factory defaults. This procedure will reset the 
router’s IP address to 192.168.1.1 (see 

Make sure your browser has Java, JavaScript, or ActiveX enabled. If you are using 

Internet Explorer, click Refresh to be sure the Java applet is loaded. Try closing the 
browser and reopening it again.

If you are attempting to set up your NETGEAR router as an additional router behind an 

existing router in your network, consider replacing the existing router instead. NETGEAR 
does not support such a configuration.

If you are attempting to set up your NETGEAR router as a replacement for an ADSL 

gateway in your network, the router cannot perform many gateway services, for example, 
converting ADSL or Cable data into Ethernet networking information. NETGEAR does not 
support such a configuration.