Netgear WNDAP620 – ProSAFE 3x3 Single Radio, Dual Band Wireless-N Access Point 참조 매뉴얼

chains and three receive radio chains, also referred to as 3x3 multiple input, multiple output 
(MIMO), can increase wireless throughput considerably.

The wireless access point provides wireless connectivity to multiple wireless network devices 
within a fixed range or area of coverage—interacting with a wireless network interface card 
(NIC) through an antenna. Typically, an individual in-building wireless access point provides a 
maximum connectivity area with about a 500-foot radius. The wireless access point can 
support a maximum of 128 clients in a range of several hundred feet. The throughput is 
shared between all clients. Make sure that you install a sufficient number of wireless access 
points to meet the required coverage, throughput, and quality of your wireless network.

The wireless access point acts as a bridge between the wired LAN and wireless clients. 
Connecting multiple wireless access points through a wired Ethernet backbone can further 
increase the wireless network coverage. As a mobile computing device moves out of the 
range of one wireless access point, it moves into the range of another. As a result, wireless 
clients can freely roam from one wireless access point to another and still maintain a 
seamless connection to the network.

The autosensing capability of the wireless access point allows packet transmission at up to 
450 Mbps, or at reduced speeds to compensate for distance or electromagnetic interference. 

Advanced wireless features that are supported on the wireless access point include a 

wireless intrusion detection system (IDS), wireless intrusion prevention system (IPS), and 
configurable wireless QoS policies.

You can manage the wireless access point from either an IPv4 or IPv6 address, and the 
wireless access point can allocate either IPv4 or IPv6 DHCP addresses to its wireless clients.

What Is in the Box?

The product package contains the following items:

ProSAFE Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP620 

Power adapter and cord (12 VCD, 1.5A)

Straight-through Category 5 Ethernet cable

Installation guide

Resource CD, which includes this manual

Wall-mount kit made up of brackets and hardware

Contact your reseller or customer support in your area if there are any missing or damaged 
parts. 

See the NETGEAR website at 

 for 

the telephone number of customer support in your area. Keep the installation guide, along 
with the original packing materials. If you need to return the wireless access point for repair, 
use the packing materials to repack the wireless access point.