Netgear WNDAP620 – ProSAFE 3x3 Single Radio, Dual Band Wireless-N Access Point 참조 매뉴얼
Management and Monitoring
70
ProSAFE Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP620
7.
Verify that the new software file has been installed by selecting Monitoring > System. The
System screen displays (see
System screen displays (see
on page 78). The firmware version is shown in the
Access Point Information section of the screen.
Manage the Configuration File or Reset to Factory
Defaults
Defaults
•
•
•
•
The wireless access point settings are stored in the configuration file. You can save this file
(back it up) to a computer, restore it from a computer, or reset it to factory default settings.
(back it up) to a computer, restore it from a computer, or reset it to factory default settings.
Save the Configuration
To save your settings:
1.
Select Maintenance > Upgrade > Backup Settings. The Backup Settings screen
displays (see the following figure).
displays (see the following figure).
2.
Click Backup. Your browser extracts the configuration file (the file name is config) from the
wireless access point and prompts you for a location on your computer to store the file.
wireless access point and prompts you for a location on your computer to store the file.
3.
Follow the instructions of your browser to save the file.
Figure 39.