Netgear WC7600v1 - ProSAFE Wireless Controller 사용자 설명서
RF Planning and Deployment
56
ProSAFE Wireless Controller
Recommended RF Planning Procedure for a Building
We recommend that you first set up your building and floors to scale and define the floor
plans. For more information, see
plans. For more information, see
Then, for each floor, perform the following tasks:
•
Use the WiFi Auto Planning Advisor
See
•
(Optional) Manually add and fine-tune access points on each floor.
See
•
(Optional) Manually add and fine-tune antennas.
See
•
(Optional) Display the WiFi coverage.
See
•
(Optional) Display and fine-tune the WiFi inventory.
See
•
(Optional) Download the report.
See
After you install or move the physical access points and antennas according to the RF plan
for a floor, deploy the floor plan by placing the virtual access points at the virtual locations on
the floor map to match the actual physical locations of the physical access points on the floor
as closely as possible. Doing so enables you to generate a realistic heat map for the
deployed floor plan.
the floor map to match the actual physical locations of the physical access points on the floor
as closely as possible. Doing so enables you to generate a realistic heat map for the
deployed floor plan.
Manage a Building and Floors for an RF Plan
This section describes how you can define a building and floors and make modifications after
you define them.
you define them.
Defining a floor includes the following main tasks:
•
Uploading a custom floor map and setting dimensions (see
•
If you do not set dimensions, scaling the floor (see
•
Adding WiFi coverage zones and WiFi noncoverage zones (see
•
Adding WiFi building obstacles (see
•
Adding WiFi obstruction areas (see