Netgear WNDAP350 – ProSAFE Dual Band Wireless-N Access Point 사용자 설명서

다운로드
페이지 104
Introduction 
9
 ProSAFE Dual Band Wireless N Access Point WNDAP350
Hidden Mode. The SSID is not broadcast, assuring only clients configured with the 
correct SSID can connect.
Secure Telnet Command Line Interface. The secure Telnet command line interface 
enables direct secure access over the serial port and easy scripting of configuration of 
multiple WNDAP350s across an extensive network via the Ethernet interface. An SSH 
client is required.
Configuration Backup. Configuration settings can be backed up to a file and restored.
Power over Ethernet. Power can be supplied to the WNDAP350 over the Ethernet port 
from any 802.3af compliant mid-span or end-span source. Please refer to the Appendix 
for a list of compliant Netgear PoE switches.
Autosensing Ethernet Connection with
 
Auto Uplink
 
Interface. Connects to 
10/100/1000 Mbps IEEE 802.3 Ethernet networks.
LED Indicators. Power/Test, LAN speed, LAN activity, and wireless activity for each 
radio mode are easily identified.
Wireless Multimedia (WMM) Support. WMM is a subset of the 802.11e standard. WMM 
allows wireless traffic to have a range of priorities, depending on the kind of data. 
Time-dependent information, like video or audio, has a higher priority than normal traffic. 
For WMM to function correctly, Wireless clients must also support WMM. 
WMM Power Save Support. Power Save uses mechanisms from 802.11e and legacy 
802.11 to save power (for battery powered equipment) and fine-tune power consumption.
VLAN Security Profiles. Each Security Profile can be assigned a VLAN ID as each 
Security Profile is modified.
802.11a/b/g/n Standards-Based Wireless Networking
The ProSAFE Dual Band Wireless N Access Point WNDAP350 provides a bridge between 
Ethernet wired LANs and 802.11a/b/g/n compatible wireless LAN networks. It provides 
connectivity between Ethernet wired networks and radio-equipped wireless notebook 
systems, desktop systems, print servers, and other devices. Additionally, the WNDAP350 
supports the following wireless features:
Aggregation Support
Reduced Inter Frame Spacing support
Multiple Input, Multiple Output (MIMO) support
Distributed coordinated function (CSMA/CA, Back off procedure, ACK procedure, 
retransmission of unacknowledged frames)
RTS/CTS handshake
Beacon generation
Packet fragmentation and reassembly
Auto or long preamble
Roaming among access points on the same subnet