Netgear WNDAP350 – ProSAFE Dual Band Wireless-N Access Point 사용자 설명서
Default Settings and Technical Specifications
95
ProSAFE Dual Band Wireless N Access Point WNDAP350
Factory Default Settings
You can use the reset button located on the front of your device to reset all settings to their
factory defaults. This is called a hard reset.
factory defaults. This is called a hard reset.
•
To perform a hard reset, push and hold the reset button for approximately 5 seconds
(until the TEST LED blinks rapidly). Your device will return to the factory configuration
settings shown in
(until the TEST LED blinks rapidly). Your device will return to the factory configuration
settings shown in
•
Pressing the reset button for a shorter period of time will simply cause your device to
reboot.
reboot.
Table 7. Access Point Default Configuration Settings
Feature
Description
AP Login
User Login URL
192.168.1.1
User Name (case sensitive)
admin
Login Password (case sensitive)
password
Ethernet Connection
Static IP Address
192.168.0.210
Ethernet MAC Address
See bottom label.
Port Speed
10/100/1000
Local Network (LAN)
Lan IP
192.168.1.1
Subnet Mask
255.255.255.0
Gateway Address
0.0.0.0
DHCP Server
Disabled
DHCP Client
Disabled
Time Zone
USA-Pacific
Time Zone Adjusted for Daylight Saving
Time
Time
Disabled
SNMP
Enabled, but Trap forwarding disabled
Spanning Tree Protocol
Disabled
Secure Telnet
Enabled