Netgear WN604 - Wireless-N 150 Access Point 사용자 설명서
Installation and Basic Configuration
17
Wireless N150 Access Point WN604
Configure Wireless Access
To configure your wireless settings for 11b/bg/ng:
1.
Select Configuration > Wireless. The Wireless Settings screen displays:
2.
3.
Click Apply to save your settings.
When you have completed the setup steps, you can deploy the access point in your network.
If needed, you can now reconfigure the computer that you set to use the static IP back to its
original TCP/IP settings.
If needed, you can now reconfigure the computer that you set to use the static IP back to its
original TCP/IP settings.
Deploy the Access Point
To deploy the access point:
1.
Disconnect the access point and position it where it will be deployed. The best location
is elevated, such as wall mounted or on the top of a cubicle, at the center of your
wireless coverage area, and within line of sight of all the mobile devices.
is elevated, such as wall mounted or on the top of a cubicle, at the center of your
wireless coverage area, and within line of sight of all the mobile devices.
2.
Lift the antenna so that it is vertical.
Note:
Refer to the antenna positioning and wireless mode configuration
information in the
3.
Connect an Ethernet cable from your access point to a LAN port on your router, switch, or
hub.
hub.