Netgear WN604 - Wireless-N 150 Access Point 사용자 설명서
Management
39
Wireless N150 Access Point WN604
Enable the SysLog Server
The syslog screen allows you to enable the syslog option if you have a syslog server on your
LAN.
LAN.
To enable a syslog server:
1.
Select Configuration > System > Advanced > Syslog to view the following screen:
2.
Select the Enable Syslog check box if you have a syslog server on your LAN.
3.
Enter the IP address of your SysLog server and the port number your syslog server is
configured to use.
configured to use.
•
Syslog Server IP Address. The access point sends all the syslogs to the specified IP
address if the syslog option is enabled.
•
Port Number. The port number configured in the syslog server on your LAN. The
default is 514.
4.
Click Apply to save your settings.