Netgear WN604 - Wireless-N 150 Access Point 사용자 설명서

System Screen Fields

This section describes the fields in this screen.

Access Point Name. Indicates the NetBIOS name. You can change the default name in the 

General screen (Configuration > General).

Ethernet MAC Address. The Media Access Control address (MAC address) of the access 
point’s Ethernet port.

Wireless MAC Address. The Media Access Control address (MAC address) of the access 
point’s wireless card.

Country/Region. The domain or region for which the access point is licensed for use. It 
might not be legal to operate this access point in a region other than one of those identified in 
this field.

Firmware Version. The version of the firmware currently installed.

Current Time. The current time setting of the access point.

IP Address. The IP address of the access point.

Subnet Mask. The subnet mask for the IP address of the access point.

Default Gateway. The default gateway for access point communication.

DHCP Client. Enabled indicates that the current IP address of the AP was obtained from a 
DHCP server on your network. Disabled indicated a static IP configuration.

Operating Mode. Identifies the 802.11 operating mode of the WN604.

Channel/Frequency. Identifies the channel the wireless port is using. Auto is the default 
channel setting.