Netgear Business Central Wireless Manager (BCWM) 빠른 설정 가이드

Click the LOGIN button.

The General page displays.

Disable the access point for the cloud by doing the following:

Next to Cloud Enabled, select the No radio button.

Click the APPLY button.

The access point restarts with a full web management interface and factory default settings, but
retains its IP configuration and management VLAN.

You now must log back in to the access point, might need to specify a new password, and must
upgrade the firmware (see the following steps).

Log back in to the access point by doing the following:

Open a browser on your computer.

In the address bar, enter the IP address of the access point.

Because the access point retained its IP configuration, use the same IP address as the one that
you used in Step 7.

A login window opens.

Enter the user name and password.

The user name is admin. The default password is password.

Click the LOGIN button.

If the Change Password page displays, go to Step 12.

If the General page displays, go to Step 13.

If the Change Password page displays, specify a new password by doing the following:

In the Current Password field, enter the existing password, which is the default password.

In the New Password and Repeat New Password fields, specify the new password.

Click the APPLY button.

A login window opens again.

Enter the user name and new password.

The user name is admin. The new password is the one that you just specified.

Click the LOGIN button.

The General page displays.