Netgear Business Central Wireless Manager (BCWM) 빠른 설정 가이드

Select Reset.

(The full path is Configuration > System > Reset.)

Next to Restore to factory default settings, select the Yes radio button.

Click the APPLY button.

The access point restarts with factory default settings but retains its IP configuration and management
VLAN.

The access point is now ready for cloud management by the BCWM 2.0 application or a later version
of the application. For information about how to add an access point to the application, see 

 on page 23.

You can upgrade an access point that is cloud-managed by the BCWM 1.0 application to a state in which
it can be cloud-managed by the BCWM 2.0 application or a later version of the application.

Log in to the access point’s web management interface and perform the following steps:

Disable the access point for the cloud, which causes the access point to reset to factory default settings.

Upgrade the access point firmware to version 3.5.5.0 (or for the WAC720 and WAC730 access points,
version 3.5.6.0) or a later version.

Make sure that the access point is connected to the Internet.

These steps are described in detail in the following procedure.

If you already know the IP address and password of the access point that you want
to access, you can skip Step 1 and Step 2 in the following procedure and start with
Step 3.