Netgear WNAP320 - ProSAFE Wireless-N Access Point 참조 매뉴얼

For more information about wireless channels, see the article 

“Wireless Networking Basics” available on the NETGEAR website.

A link to this article and other articles of interest can be found in 

For information about how to configure advanced wireless settings, 

see 

Test Basic Wireless Connectivity

After you have configured the wireless access point as explained in the previous sections, 

test your computers for wireless connectivity before you position and mount the wireless 
access point at its permanent position.

Configure the 802.11b/g or 802.11n wireless adapters of your computers so that they all 
have the same SSID and channel that you have configured on the wireless access 
point.

Verify that your computers have a wireless link to the wireless access point, and if you 
have enabled the DHCP server on the wireless access point, verify that your computers 
are able to obtain an IP address through DHCP from the wireless access point.

Verify network connectivity by using a browser such as Internet Explorer 6.0 or later or 
Mozilla Firefox 1.5 or later to browse the Internet, or check for file and printer access on your 
network.

If you have trouble connecting to the wireless access point, see 

In addition to wireless security and other wireless features, before you deploy the wireless 
access point in your network, configure any additional features as described in 

 and 

.