Netgear WNAP320 - ProSAFE Wireless-N Access Point 참조 매뉴얼
64
|
Chapter 4. Management
ProSAFE Wireless-N Access Point WNAP320 Reference Manual
To reboot the wireless access point:
1.
Select Maintenance > Reset > Reboot AP. The Reboot AP screen displays:
Figure 37.
2.
Select the Yes radio button. (By default, the No radio button is selected.)
3.
Click Apply to reboot the wireless access point.
The reboot process typically takes about 1 minute. When the Test LED turns off, wait a
few more seconds before doing anything with the wireless access point.
few more seconds before doing anything with the wireless access point.
Change the Administrator Password
The default password is password. You should change this password to a more secure
password. You cannot change the administrator login name (admin).
password. You cannot change the administrator login name (admin).
The ideal password should contain no dictionary words from any language, and should be a
mixture of letters (both uppercase and lowercase), numbers, and symbols. Your password
can be up to 30 characters.
mixture of letters (both uppercase and lowercase), numbers, and symbols. Your password
can be up to 30 characters.
To change the administrator password:
1.
Select Maintenance > Password > Change Password. The Change Password screen
displays:
displays:
Figure 38.