Netgear WNAP320 - ProSAFE Wireless-N Access Point 참조 매뉴얼
Chapter 4. Management
|
65
ProSAFE Wireless-N Access Point WNAP320 Reference Manual
2.
Take one of the following actions:
•
Enter a new password twice: once in the New Password field and again in the Repeat
New Password field.
•
Next to Restore Default Password, select the Yes radio button to restore the default
password. By default, the No radio button is selected.
3.
Click Apply to save your settings.
If you have restored the default password, the login password will be password. If you
have configured a new password, write it down in a secure place.
have configured a new password, write it down in a secure place.
Enable the Syslog Server
The Syslog screen allows you to enable the syslog option if you have a syslog server on your
LAN. If syslog is enabled, the wireless access point sends its syslog files to the syslog server.
LAN. If syslog is enabled, the wireless access point sends its syslog files to the syslog server.
To enable a syslog server:
1.
Select Configuration > System > Advanced > Syslog. The Syslog screen displays:
Figure 39.
Specify the settings as explained in the following table:
2.
. Click Apply to save your settings.
Table 16. Syslog Settings
Field
Description
Enable Syslog
Select the check box to enable the syslog option. By default, the syslog option
is disabled.
is disabled.
Syslog Server IP Address
Enter the IP address of the syslog server to which the wireless access point
sends the syslog files.
sends the syslog files.
Port Number
Enter the port number that is configured on the syslog server. The default port
number is 514.
number is 514.