Netgear R8300 - Nighthawk X8 AC5000 Smart WiFi Router 사용자 설명서
Set Up Ethernet Port Aggregation
To set up Ethernet port aggregation:
1.
If you are connecting a switch, make sure that the switch supports 802.3ad LACP.
You must configure the switch before you connect the Ethernet cables to the router.
WARNING:
To avoid causing broadcast looping, which can shut down your network, do not
connect an unmanaged switch to Ethernet aggregate port 1 and port 2 on the router.
connect an unmanaged switch to Ethernet aggregate port 1 and port 2 on the router.
2.
Use Ethernet cables to connect a device that supports Ethernet port aggregation, such as a NAS or network
switch, to Ethernet port 1 and port 2 on the router.
switch, to Ethernet port 1 and port 2 on the router.
3.
Set up Ethernet port aggregation on the device that is connected to Ethernet port 1 and port 2 on the router.
For information about how to set up Ethernet port aggregation on your device, see the documentation that came
with your device.
with your device.
For information about viewing the status of the Ethernet port aggregation, see
on page 70.
View Ethernet Port Aggregation Status
You can view the status of Ethernet aggregation for a device that is connected to the router's designated Ethernet
aggregation ports. The device must support Ethernet aggregation.
aggregation ports. The device must support Ethernet aggregation.
To view the status of the Ethernet port aggregation:
1.
Launch a web browser from a computer or WiFi device that is connected to the network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3.
Enter the router user name and password.
The user name is admin. The default password is password. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Advanced Setup > Ethernet Port Aggregation.
Network Settings
70
Nighthawk X8 AC5000 Tri-Band WiFi Router