Netgear FVS318v1 – Prosafe Wireless N VPN Firewall 참조 매뉴얼

E-8

NETGEAR VPN Configuration of FVS318 or FVM318 to FVL328

–

Type the LAN Subnet Mask of Gateway B (255.255.255.0 in our example) in the Local IP 
Subnet Mask field.

–

From the Traffic Selector Remote IP drop-down box, select “Subnet addresses”.

–

Type the starting LAN IP Address of Gateway A (10.5.6.1 in our example) in the Remote 
IP Start IP Address field.

–

Type the LAN Subnet Mask of Gateway A (255.255.255.0 in our example) in the Remote 
IP Subnet Mask field.

–

From the ESP Configuration Encryption Algorithm drop-down box, select 3DES.

–

Select Enable Authentication in the ESP Configuration Enable Authentication checkbox.

–

From the ESP Configuration Authentication Algorithm drop-down box, select MD5.

–

Select NETBIOS Enable in the NETBIOS Enable checkbox to enable networking features 
such as Windows Network Neighborhood.

5.

Click Apply. You will be taken back to the VPN Policies Menu page.

6.

When the screen returns to the VPN Policies, make sure the Enable checkbox is selected. 
Click Apply.