Netgear FVS318v1 – Prosafe Wireless N VPN Firewall 참조 매뉴얼

NETGEAR VPN Configuration FVS318 or FVM318 with FQDN to FVL328

G-5

6.

Click on the VPN Settings link on the left side of the main menu. 

–

For the FVS318: Click the radio button of the first available VPN tunnel. Click the Edit 
button below. This will take you to the VPN Settings – Main Mode Menu.

–

For the FVM318: Click Add. This will take you to the VPN Settings – Main Mode Menu.

–

In the Connection Name box, enter in a unique name for the VPN tunnel to be configured 
between the NETGEAR devices. For this example we have used toFVL328.

–

Enter a Local IPSec Identifier name for the NETGEAR FVS318 Gateway A. This name 
must be entered in the other endpoint as Remote IPSec Identifier. In this example we used 
netgear.dyndns.org (the FQDN) as the local identifier.

–

Enter a Remote IPSec Identifier name for the remote NETGEAR FVL328 Gateway B. 
This name must be entered in the other endpoint as Local IPSec Identifier. In this example 
we used 22.23.24.25 as the remote identifier.

–

Choose “a subnet of local addresses” from the” Tunnel can be accessed from” pull-down 
menu.

–

Type the starting LAN IP Address of Gateway A (10.5.6.1 in our example) in the Local IP 
Local LAN start IP Address field.