Netgear FVS318v1 – Prosafe Wireless N VPN Firewall 참조 매뉴얼

5-12

Advanced WAN and LAN Configuration

3.

Access the website of one of the dynamic DNS service providers whose names appear in the 
‘Use a dynamic DNS service’ list, and register for an account.

 

For example, for oray.net, click the link or go to www.oray.net.

4.

Select the Use a dynamic DNS service radio button for the service you are using. 

5.

Type the FQDN that your dynamic DNS service provider gave you.

 

If the URL the dynamic DNS service provider gave you is YourName.Ng.iego.net then this is 
your FQDN.

6.

Type the User Name for your dynamic DNS account. 

7.

Type the Password (or key) for your dynamic DNS account. 

8.

Click Apply to save your configuration. 

Static Routes provide additional routing information to your Firewall. Under normal 
circumstances, the Firewall has adequate routing information after it has been configured for 
Internet access, and you do not need to configure additional static routes. You must configure 
static routes only for unusual cases such as multiple routers or multiple IP subnets located on your 
network.

As an example of when a static route is needed, consider the following case:

•

Your primary Internet access is through a cable modem to an ISP.

•

You have an ISDN router on your home network for connecting to the company where 
you are employed. This router’s address on your LAN is 192.168.0.100.

•

Your company’s network is 134.177.0.0.

The router supports only basic DDNS and the login and password may not be 

secure. If your ISP assigns a private WAN IP address such as 192.168.x.x or 10.x.x.x, 
the dynamic DNS service will not work because private addresses will not be routed on 
the Internet.