Netgear S3300-28X (GS728TX) - ProSAFE S3300 Smart Switch Series 하드웨어 매뉴얼

For 10GBASE-T connections, and in particular for connections over 
30 meters (about 100 feet), NETGEAR recommends that you use a 
Category

 

6a cable or a cable that is even higher rated.

The following procedure describes how to install an optional SFP transceiver module into one 
of the SFP ports of the smart switch.

Contact your NETGEAR sales office to buy these modules. If you do 
not want to install an SFP module, skip this procedure.



Insert the transceiver into the SFP port.

Press firmly on the flange of the module to seat it securely into the connector. 

You can install up to two additional 10 Gbps or 1 Gbps modules using this procedure.

The following figure shows model S3300-52X-PoE+. However, you install SFP transceiver 
modules in the other S3300 models in the same manner.