Netgear S3300-28X (GS728TX) - ProSAFE S3300 Smart Switch Series 관리자 가이드

The Maintenance main navigation tab gives access to the Troubleshooting configuration 
menu. From this menu, you can perform basic troubleshooting functions such as pinging an 
IPv4 or IPv6 address to check if the switch can communicate with a particular network host 
and tracing an IPv4 or IPv6 route to determine the packet’s path to a remote destination.

The Troubleshooting menu has links to the features described in the following sections:

Use the Ping screen to tell the switch to send a ping request to a specified IP address. You 
can use this feature to check whether the switch can communicate with a particular network 
host.



Select Maintenance 



 Troubleshooting 



 Ping.

In the IP Address/Host Name field, specify the IP address or the host name of the station 
you want the switch to ping. The initial value is blank. This information is not retained across 
a power cycle.

Optionally, configure the following settings:

In the Count field, specify the number of pings to send. The valid range is 1–15.

In the Interval (secs) field, specify the number of seconds between pings sent. The 
valid range is 1–60.

In the Size field, specify the size of the ping (ICMP) packet to send. 

In the Source field, select the source type from which the ping is sent, which is one of 
the following:

None. The source is the IP address of the default outgoing interface.

IP address. The source is an IP address that you specify. If you select this option, 
the IP Address field appears. Specify the source IP address of the ping in the IP 
address field.

Interface. The ping is sent from a specified interface. If you select this option, the 
Interface field appears. Use the menu to select the interface from which to send 
the ping.

Click the Apply button. 

The switch sends the number of pings specified in the Count field, and the results are 
displayed below the configurable data in the Ping area: