Netgear FS526Tv2 - 24-Port Smart Switch with Gigabit Ports 사용자 가이드

Click the Apply button.

The settings are saved.

Green Ethernet features allow for power consumption savings. Both the Auto Power Down 
mode feature and the EEE Mode feature are disabled by default.



Select System > Management > Green Ethernet Configuration. 

The Green Ethernet Configuration screen displays.

Denial of Service TCP Flag Select one of the following radio buttons:

•

Disable. The feature is disabled. This is the default setting.

•

Enable. All of the following packets are dropped:

- 

Packets that have the TCP flag SYN set and a TCP source port 
number that is lower than 1024.

- 

Packets that have the TCP control flags set to zero and a TCP 
sequence number that is zero.

- 

Packets that have the TCP flags FIN, URG, and PSH set and a TCP 
sequence number that is zero.

- 

Packets that have both the TCP flags SYN and FIN set.

Denial of Service L4 Port

Select one of the following radio buttons:

•

Disable. The feature is disabled. This is the default setting.

•

Enable. Packets that have a TCP source port that is equal to the TCP 
destination port are dropped, and packets that have a UDP source port 
that is equal to the UDP destination port are dropped.

Denial of Service ICMP

Select one of the following radio buttons:

•

Disable. The feature is disabled. This is the default setting.

•

Enable. ICMP echo request packets that are carried in an unfragmented 
IPv4 or IPv6 datagram are dropped if the total length in the IP header 
indicates a value that is greater than the sum of the configured maximum 
ICMP packet size and the IP header length.

Denial of Service Max 
ICMP Size

Specify the maximum ICMP packet size. Enter a value in the range from 0 to 
1023 bytes. The default setting is 512

 

bytes.